Uploaded on
12 Jun 2023
Skill-Lync
Combinational logic circuits
Logic gates are the simplest combinational circuits. A combinational logic circuit is a circuit whose outputs only depend on the current state of its inputs. These circuits realize Boolean functions and deal with digitized signals, usually denoted by 0s and 1s.
The behavior of a combinational circuit is memoryless; given a stimulus to the input of a combinational circuit, a response appears at the output after some propagation delay, but the response is not stored or fed back. The output depends solely on its most recent input and is independent of the circuit’s past history.
There are three basic logic gates-
The universal logic gates are-
Let us try implementing combinational circuits in Simulink.
Example:1
For the expression -
Here,
Steps of solving:
When, A=0, B=0, C=1
When A=1, B=1, C=1
Example:2
For the expression- F=(A.B)+(A.B’)
1) Truth table
2. For this equation, we have chosen two AND gates, one Not gate to represent B complement, and an OR gate.
3. Simulink model for the logic gate implementation is given below
For A=1, B=1
For, A=0, B=1
Thus the logic gates for the combinational circuits have been computed.
Author
Navin Baskar
Author
Skill-Lync
Subscribe to Our Free Newsletter
Continue Reading
Related Blogs
The average vehicle body gives any vehicle its structural integrity, while the electric motor is concerned with the generation of torque or force. The electric motor can be a permanent magnet synchronous motor, brushless dc motor etc.
24 Aug 2022
In industrial control applications, a PID controller is a device that regulates temperature, flow, pressure, speed, and other process variables. PID (proportional integral derivative) controllers, which use a control loop feedback mechanism to control process variables, are the most accurate and trustworthy controllers.
26 Aug 2022
A lithium-ion (Li-ion) battery is a complicated battery technology that uses lithium ions as a key component of its electrochemistry. During a discharge cycle, lithium atoms within the anode are ionized and separated from their electrons.
28 Aug 2022
Dash in your car is your source of information. It basically functions as a control panel that sits in front of the driver and shows numerous controls and instrumentation required for your car to function.
31 Aug 2022
A hybrid vehicle has two power sources for motion within the same vehicle. Basically the hybrid vehicle is split into two types supported the source for propulsion - combustion engine type and Hydrogen power cell.
06 Sep 2022
Author
Skill-Lync
Subscribe to Our Free Newsletter
Continue Reading
Related Blogs
The average vehicle body gives any vehicle its structural integrity, while the electric motor is concerned with the generation of torque or force. The electric motor can be a permanent magnet synchronous motor, brushless dc motor etc.
24 Aug 2022
In industrial control applications, a PID controller is a device that regulates temperature, flow, pressure, speed, and other process variables. PID (proportional integral derivative) controllers, which use a control loop feedback mechanism to control process variables, are the most accurate and trustworthy controllers.
26 Aug 2022
A lithium-ion (Li-ion) battery is a complicated battery technology that uses lithium ions as a key component of its electrochemistry. During a discharge cycle, lithium atoms within the anode are ionized and separated from their electrons.
28 Aug 2022
Dash in your car is your source of information. It basically functions as a control panel that sits in front of the driver and shows numerous controls and instrumentation required for your car to function.
31 Aug 2022
A hybrid vehicle has two power sources for motion within the same vehicle. Basically the hybrid vehicle is split into two types supported the source for propulsion - combustion engine type and Hydrogen power cell.
06 Sep 2022
Related Courses